locker safety
Safety first! Mustard lockers are nice and sturdy, but serious or fatal injury can occur from your locker tipping.
To reduce the risk of tipping, we strongly recommend securing your locker to the wall. All Mustard lockers are equipped with slots in the back to enable you to do so.
Please ensure you use the correct anchors for your wall. These are not provided, so please consult a qualified tradesperson if you require advice.
Here are some other handy hints to help avoid accidents:
- Never sit, stand or climb on your locker
- Keep doors closed when not in use
- Avoid placing anything heavy on top of your locker
- Keep heaviest items on the bottom shelves
How to secure your original locker door (so it doesn't fall off!)
Step 1
At the top of the door, insert the L shape post up into position through the holes.
Step 2
Push the tab up! This holds the door in place.
How to attach The Mixer + The Collector to the wall
Step 1
From the back of the locker, screw the wall brackets to the side panels using the hex screws + hex key provided.
Step 2
Place your locker in the desired position against the wall.
Adjust the brackets so that they extend out the back of the locker and touch the wall.
Step 3
Using a pencil, mark the wall through the slot bracket. Repeat on the other side.
Step 4
Through inside of your locker, screw the brackets to the wall. Select the appropriate fixing type for your wall. If you need help, consult a qualified tradesperson for advice.
How to secure your original locker to the wall (with no baseboards)
Step 1
Stand your locker flush against the wall in your chosen spot.
Step 2
From inside your locker, mark the wall at the top of the slots.
Step 3
Select the appropriate anchor type for your wall. If you need help, consult a qualified tradesperson for advice.
Step 4
Screw your anchors through the slots.
Ta-da! Give yourself a high five.
How to secure your original locker to the wall (with baseboards)
Step 1
Measure the depth of your baseboard.
Step 2
Source a piece of timber the same depth as your baseboard and wider than the distance between the two slots on your locker.
Step 3
Stand your locker flush against the baseboard in your chosen spot.
Step 4
From inside your locker, mark the wall at the top of the slots.
Step 5
Place the timber against your wall, covering the marks.
Step 6
Mark the best position for the screws to attach the timber to the wall. You may want to align these to your wall studs.
Step 7
Select the appropriate anchor type for your wall. If you need help, consult a qualified tradesperson for advice.
Step 8
Use these anchors to attach the timber to the wall.
Step 9
Place your locker flush against the timber in your chosen spot.
Step 10
Screw your anchors through the slots into the timber. Ta-da! Give yourself a high five.
Got questions?
We’re always here to help! Check out our FAQ or drop us a line at hey@mustardmade.com
Need help building your locker? You’ve got this!
